Lane Striping

The Modify lane striping tool edits the lane striping for a section of the road.

From the Display marking tools , select the Modify stripe marking tool.

Tool Settings

Once selected, the Modify lane striping settings dialog displays. Clicking on the Pattern opens the Modify lane striping dialog from which to select a pattern to use.

Refer to Library Picker for details.

To Modify lane striping

Select the pattern use.
Click on the road from which the new lane striping should be applied.
Move your mouse and click again to complete.

Note:

The ESC keyboard key will cancel the command at any time during the modification.

Road marking patterns repeat broken lines based on the number of lanes contained in the road template.

Heads up Display dialog

When using the Modify lane striping tool, the heads-up display dialog appears and displays the Start and the End Station.

Editing Lane Striping

When selecting the Lane Marking, the road can be selected instead. In order to switch between the road and the lane marking selection, right-click on the segment until the marking is selected, then accept the selection with a left-click. Use the arrow manipulators to move the lane marking, or press the Delete key to remove the selected marking.

Edit properties

It is also possible to edit the marking properties from the Information panel.

User Selection	Description
Name	The system assigns this property by default at creation time. However, the user can change this property anytime to help identify objects. Changing this property will not change the road geometry.
Status	Determines the life cycle of an object. It can be either Proposed, Existing or Construction. The Proposed status will determine if the object is used in the cost and quantities calculation. Changing this property will not change the bridge geometry.
Marking Pattern	Displays the pattern type.
Start Station	Displays the start station value relative to the reference alignment.
Stop Station	Displays the stop station value relative to the reference alignment.
Stop Line at Start	Used to define if a stop line must be added at the start station of the marking.
Stop Line at End	Used to define if a stop line must be added at the stop station of the marking.